Sven PLATINUM Operation Manual

ENG
Power Strip Surge Protector PLATINUM
Operation Manual
Congratulations on the purchase of TM SVEN surge protector!
SVEN Platinum surge protector is designed for connection of electrical
appliances to the electrical network and their protection against high-voltage
surge pulses and permanent filtration of high-frequency noises.

FEATURES

• Individual socket switches with On state lighting for each socket
• Power LED indication
• High-performance LC-filter for noise and interference protection throughout
the supply main
• Powerful varistor high-voltage discharge protection (lightning and industrial
interferences)
• Automatic restorable fuse for cutting-off at overloads and short circuits
• Construction of output sockets allows to connect both modern Russian and
Euro plugs
• Wall-mountable in any position
• Non-flammable high-impact ABS-plastic case ensures high fire safety level

SAFETY PRECAUTIONS

• Do not connect the surge protector to the electrical network with overrating
voltage.
• Do not connect the load to the surge protector with the total power, which
exceeds the power indicated in specifications of this device.
• Do not install the surge protector in places with possible ingress of liquid,
moisture, dust and high temperature exposure.
• Do not open and do not make any repairs by yourself.
• It is recommended to connect the surge protector to the grounded electrical
network.

CONNECTION

• Connect equipment to surge protector sockets.
• Connect the surge protector to 220 V electrical network, turn on the master
switch.
• Turn on a required load using individual switches.
• Every switch has the turn on condition backlighting

OPERATION

• Do not overload the surge protector by connection of several powerful
devices.
• On operation of the automatic fuse due to the overload, turn on the surge
protector once more in 5-10 minutes after reduction of the total connected
load to a permissible limit. For this purpose, press the on/off button on the
fuse.
• If high-voltage impulses or intolerable high voltage occurs at the surge
protector input, the built-in emergency protection can disconnect the surge
protector completely. The surge protector operation with the partial or com-
plete resource loss of the surge protector components is intolerable.
PLATINUM