Developer Required; Maintenance Required - Sharp AR-203E Operation Manual

(B) Open the original cover and rotate the roller rotating knob to remove the
misfed original from the exit area. If the misfed original cannot be easily
removed, proceed to (C).
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the knob.
A number may appear in the display after a minus sign, indicating the
number of the originals that must be returned to the original feeder tray.
Open and close the SPF to clear the SPF misfeed
then clear the misfeed and return the required number of originals. Then
press the start (

DEVELOPER REQUIRED

When the developer replacement required (
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY
AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as
soon as possible.

MAINTENANCE REQUIRED

When maintenance (
service technician is required. Contact your service centre as soon as possible.
56
) key to resume copying.
) indicator lights up, service by an authorised SHARP
Roller
indicator and
( )
) indicator lights up, the developer