Bypass Feed (Including Special Paper) - Sharp AR-203E Operation Manual

BYPASS FEED (including special paper)

The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from A6 to A4 and in
the weight range of 56 to 128g/m
105 to 128g/m
• The multi-bypass tray can hold maximum of 50 sheets of paper.
• The original image must be smaller than the paper or media for
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
2
Set the paper guides to the paper width. Insert the paper (print
face down) all the way into the multi-bypass tray.
10
2
, A4 is the maximum size.)
(Capacity will vary depending on the type of paper loaded.)
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
To close the multi-
bypass tray, perform
step 1 and then step
2 in the illustration
and push the round
projections at the
right of the tray until
they click.
2
can be used in this tray. (For paper weighing from
Print face