Using The Attachments - Shark Ultimate Roadster V1315 Instruction Manual

USING THE ATTACHMENTS

Caution: When using one of the attachments during cleaning,set the vacuum
cleaner to the upright position.
1 Remove the attachments from the
vacuum cleaner.
2
Press the release button C to
disconnect the handle from the
vacuum cleaner.
Caution:
When removing the attachments, pull
them in the directions shown in the
illustration.Pulling them in the wrong
direction or pulling them forcefully may
cause damage to the attachment clamp.
Attach the attachments on the handle or
3
the suction hose B.
Attach the attachments as shown below.
Handle
Suction Hose A
Suction Hose B
Hook the hose holder onto the holder mount.
Caution:
Before using the attachments, please make sure
the hose is hooked on the holder mount.
Upholstery tool & Dusting brush
To detach the dusting brush from the upholstery tool: Press the
tabs on the brush downward to remove it.
To reattach the dusting brush to the upholstery tool: Insert
the front of the upholstery tool under the hook on the front of the
dusting brush. Press down on the back of the upholstery tool to
snap it into place under the dusting brush tabs.
When you have finished using the attachments,replace them
in their original positions as shown on page 4.
8
Attachment Clamp
Wand
Caution: Before using the suction hose B,
please make sure the handle is
reattached on the body.
Wand
Crevice Tool
Upholstery
Tool
Crevice Tool
Hose
Holder
Groove
Release
Button C
Dusting
Brush
Holder
Mount
Tabs