Reattaching The Bottom Plate - Shark Ultimate Roadster V1315 Instruction Manual

REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
1
parallel position and turn it over.
2
Slide the latch in the direction
of the arrow.
3
Remove the bottom plate by pulling
the tabs as illustrated.

REATTACHING THE BOTTOM PLATE

1 Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
3 Slide the latch in the direction shown.
Latch
14
Bottom Plate
Projection
Groove
Latch Press
2 Push the bottom plate as shown.
Press
Turn the vacuum over and place in the
4
upright position.
Pull here
Press
Bottom Plate
Press