Table of Contents
Advertisement
Instructions for use
3. While RINSE
(TREMPAGE).
After the flashing stops, the additional rinse is set. It is set until it is
canceled again.
When the additional rinse is set, the indicator RINSE
lights up on the program sequence disply before the program start and
during the additional rinse.
4. If you want to check whether the additional rinse is set:
– Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).
– Briefly press the button SOAKING (TREMPAGE).
The additional rinse is set if RINSE
gram sequence display.
Cancel Additional Rinse:
0
1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT).
2. Keep the button SOAKING (TREMPAGE) pressed for at least 5 seconds.
As soon as the button is pressed, RINSE
program sequence display. After 5 seconds, RINSE
flashing and lights up constantly for a further 5 seconds.
3. While RINSE
SOAKING (TREMPAGE).
After RINSE
is cancelled.
An additional rinse increases water consumption and the program run
3
time.
Solution Cooling
It may be necessary to cool down the washing solution before pumping
off in order to avoid thermal damage to plastic drainage pipes.
The washing solution is cooled down at the end of the main washing
3
cycle before pumping off (by incoming cold water).
(This setting is only effective for COTTONS/LINEN (BLANC/COULEURS) at
temperatures of over 40 °C.)
No solution cooling is set when the unit is delivered.
40
+
+
(RINCAGE
) is flashing, release the button SOAKING
+
+
(RINCAGE
) lights up constantly, release the button
+
+
(RINCAGE
) has stopped lighting up, the additional rinse
+
+
(RINCAGE
) flashes on the pro-
+
(RINCAGE
+
+
+
(RINCAGE
)
+
) flashes on the
+
(RINCAGE
) stops
Hide quick links:
Advertisement
Table of Contents
