Advertisement
Click the Save button to save the configuration. And then click the Apply button to let the
Click the Save button to save the configuration. And then click the Apply button to let the
configuration come into operation.
configuration come into
5. 5.1. 1.3 3 Add An
As the following figure config
As the following
up WAN2 to Bridge Mode. Port1 is bound to the WAN2
up WAN2 to Bridge Mode. Port1 is bound to the WAN2
Click SAVE-->Apply button , then we get the '2_INTERNET_B_VID_' Connection.
Click SAVE-->Apply button , then we get the '2_INTERNET_B_VID_' Connection.
You can set up serval WAN Connection to carry out different service to subscriber.
You can set up serval WAN Connection to carry out different service to subscriber.
operation.
Add An Br
Brid idge Mode W
ge Mode WAN C
figure configured, WA
ured, WAN 1 is the defa
AN Con
onnecti
nection
N 1 is the default WAN
ult WAN in Router Mod
in Router Mode, and we set
on
e, and we set
Advertisement
