Advertisement
gateway.
gateway.
3) 3) In PPPoE
In PPPoE mode, you
Note: All th
Note: All th e ports are bound
setup another Bridge Mode WAN connection, the port which you choose to bind
setup another Bridge Mode WAN connection, the port which you choose to bind
with
with the bridge WAN
connection in Router Mode shared the Bind Port (exception the port bind with
connection in Router Mode shared the Bind Port (exception the port bind with
Bri dge Mode W
Bri
dge Mode WAN Connectio
You need to select a Connect Type Setting in the WAN Connection configuration.
You need to select a Connect Type Setting in the WAN Connection configuration.
You can choose the STATIC IP, DHCP and PPPoE for different network application.
You can choose the STATIC IP, DHCP and PPPoE for different network application.
Below is the page as you choose the STATIC IP. You should configure the IP address,
Below is the page as you choose the STATIC IP. You should configure the IP address,
Mask, Gateway and DNS.
Mask, Gateway and DNS.
Below is the page as you choose the PPPoE IP. You should configure the PPPoE user
Below is the page as you choose the PPPoE IP. You should configure the PPPoE user
name and password here.
name and password here.
If you choose DHCP, the router willl obtain an IP address automatically from the up-layer
If you choose DHCP, the router willl obtain an IP address automatically from the up-layer
device.
device.
Bridge Mode: If you use bridge mode, L2
Bridge Mode:
to WAN is transparent transmission. Under this application condition, PC or other terminal
to WAN is transparent transmission. Under this application condition, PC or other terminal
after connecting will get IP address from up-layer device.
after connecting will get
mode, you need to
need to enter the
e ports are bound with
the bridge WAN connection
connection will d
AN Connectio n).
If you use bridge mode, L2 frame produced by WAN port and port binding
IP address from up-layer device.
enter the user name
user name and password.
and password.
with the defa
the default Router Mode W
ult Router Mode WAN Conne
will d e- e-bind w
bind w ith t
ith t he W
he WAN connection. All th
n).
frame produced by WAN port and port binding
AN Connection
ction . If you
. If you
AN connection. All th e W
e WAN
AN
Advertisement
