Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for C-Data FD704GW
Summary of Contents for C-Data FD704GW
- Page 1 4GE+CATV+WiFi Single Fiber GPON ONT User Manual...
-
Page 2: Table Of Contents
Contens 1. Introduce ............................. 3 1.1 Applications ........................3 1.2 Function ..........................3 1.3 Interface ..........................4 1.4 LED Description ....................... 4 1.5 environmental parameter ....................5 2. Introduce configuring the network ................... 5 2.1 Prepare for login the ONT web management .............. 5 2.2 Login ONT .......................... -
Page 3: Introduce
1. Introduce The 4GE+CATV+WIFI terminal devices ONT are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. These boxes are based on the mature GPON technology, which have high ratio of performance to price, and the technology of 802.11n Wi-Fi, Layer 2/3 as well. -
Page 4: Interface
► Security: Provides multi-level authentication based on the device, user and service, and provides the data channel encryption for safety. ► QoS: Provides QoS services meeting the requirements of various services for the local devices and network ► Network management: Provides multi-mode network management. 1.3 Interface 1.4 LED Description... -
Page 5: Environmental Parameter
Indicator Description On: The ONU is power on Power status Off: The ONU is Power off Blinking：Data is being transmitted WIFI WIFI On：Wi-Fi function Opens On: Ethernet connection is normal LAN1-4 LAN port status Blinking: Data is being transmitted through the Ethernet port Off: Ethernet connection is not set up On: Optical power lower than receiver sensitivity ;... -
Page 6: Login Ont
Note： Please don’t power off the ONT in the process of manage the ONT by the WEB interface. 2.2 Login ONT Step 1 Open the explore browser and input the ip address “http://192.168.1.1” （ONTdefault IP） 。 Step 2You need the user name and password for login. The default user name and password are on the label of the ONT bottom. -
Page 7: Ont Authentication
After you login the ONT as the administrator, you can check, configure and change the configuration of the ONT. Some of configuring and changing will take effect only after restart the ONT. Login success, a “Device Info” windows will show as bellow. There are eight item of the status function. -
Page 8: Lan Configuration
2. Click Apply to apply the configuration Note: Suggest you use the Chrome Internet Explorer to avoid display problem. 2.3 LAN Configuration 1. In the navigation tree on the left, choose Advanced Setup> LAN Port Work Mode. In the pane onthe right, determine whether the LAN port works mode. 1) RG: LAN port works in layer 3 mode, that is, the gateway mode;... -
Page 9: Add Wan Connection Pppoe
be obtained through DHCP, Static, or PPPoE. The IP address of the PC connected to the ONT can be obtained from the DHCP address pool of the ONT or can be set manually. WAN in bridge mode: The ONT functions as a relay and does not process data. The ONT does not obtain the IP address allocated by the upper-layer device and it does not allow manual configuration of a static IP address. - Page 10 Step 4:Enter the PPP Username and Password provide by ISP. Step 5: Select default gateway.
- Page 11 Step 6: Select the DNS. Step 7: Show the WAN configuration, click the “Apply/Save” button. Step 8: Show the all WAN connection.
-
Page 12: Add Wan Connection Ipoe
2.4.2 Add WAN Connection IPOE Step 1-2: it is the same as the WAN Connection PPPoE. Step 3: Select the IP over Ethernet, configure the VLAN and priority. Step 4: Select the dynamic or static IP mode. -
Page 13: Add Wan Connectionas Bridging
Step 5: Configure the NAT, Firewall and IGMP multicast. Step 6-8: It is same as PPPoE configure process. 2.4.2 Add WAN ConnectionAs Bridging Step 1-2: it is the same as the WAN Connection PPPoE. Step 3: Select the Bridging mode Step 4: Next configure process is the same as PPPoE. -
Page 14: Iptv Configuration
2.5 IPTV Configuration 2.5.1IGMP Proxy In the WAN Connection creating page, you can enable the IGMP Porxy when the WAN Connection is not setting to bridging. 2.5.2 IGMP Snooping In the Advanced Setup >LAN , you can configure the IGMP Snooping. Standard Mode: Before the IGMP Report send, the multicast data will send to all bridging port, and after the IGMP Report have sent, only the ports in the IGMP Report can receive multicast. -
Page 15: Wireless Setting
2.6 Wireless setting 2.6.1 Basic setting Selected wireless -> basic, This page allows you to configure basic features of the wireless LAN interface, You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. - Page 16 Selected wireless -> security, you can to configure security features of the wireless LAN interface, You may setup configuration manually or through WiFi Protected Setup(WPS) Note: When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access Point enabled or Mac filter list is empty with"...
-
Page 17: Mac Filter
2.6.2.3 WPS Setup 2.6.3 MAC filter Selected wireless -> MAC filter，Set MAC Restrict Mode, if you need to add MAC address limit, click "add" button, enter the required MAC address segment, Click "Apply/Save" to configure the wireless options. -
Page 18: Wireless Bridge
2.6.4 Wireless Bridge Selected Wireless -> Wireless Bridge, This page allows you to configure wireless bridge features of the wireless LAN interface. Select Disabled in Bridge Restrict which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled or Enabled(Scan) enables wireless bridge restriction. -
Page 19: Station Information
2.6.6 Station information Selected Wireless -> Station Info, This page shows authenticated wireless stations and their status 2.7 CATV setting Selected Advanced Setup -> LAN -> Enable CATV Module, On/Off CATV function, Click "Apply/Save" to configure the CATV function. Display CATV function status... -
Page 20: Equipment Management
2.8 Equipment Management 2.8.1 Restore Default Selected management -> Settings -> Restore Default, Equipment will be restored to factory default 2.8.2 Update software Selected management -> Update software -> Selected update file, Upgrade to the latest software version of the application... -
Page 21: Equipment Reboot
2.8.3 Equipment Reboot Selected Management -> Reboot, After 2 minutes the reboot of the equipment.