Preparing For Use; Connecting The Hose; Connecting The Telescopic Tube - Philips FC8952 Manual

- Do not put the appliance in vertical position during use.
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your
mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on.
- Do not use the appliance and the mini turbo brush on pets.
- Always unplug the appliance before cleaning or maintaining the appliance.
Caution
- Do not suck up large objects, as this may cause the air passage in the tube or hose to become
obstructed.
- If you add non-foaming soap or perfume to the water, make sure you clean the dust bucket
properly after use to prevent foam from developing inside the dust bucket.
-
fresh water.
- After use, always empty the dust bucket and clean the dust bucket and AquaWeb.
-
back into the appliance.
- During vacuum cleaning, especially in rooms with low air humidity, your vacuum cleaner builds
up static electricity. As a result you can experience electric shocks when you touch the tube or
other steel parts of your vacuum cleaner. These shocks are not harmful to you and do not
damage the appliance. To reduce this inconvenience we advise you:
1 to discharge the appliance by frequently holding the tube against other metal objects in the
room (for example legs of a table or chair, radiator etc.); (Fig. 2)
2 to raise the air humidity level in the room by placing water in the room. For example, you can
near your radiators (Fig. 3).
properly and according to the instructions in this user manual, the appliance is safe to use based on

Preparing for use

Connecting the hose

1
2

Connecting the telescopic tube

1
2
Use the same method to connect and disconnect the nozzles.
3
ENGLISH
7