Mid.tone Button - Sekonic L-758C Operating Manual

2) The EV scale displays Clipping points(+/-),Dy-
namic range(+/-)and Mid. Tone with a triangle
" "icon.
3) Measured value exceeding Dynamic range will
be displayed as a slow blinking "
icons.Measurements that exceed the clipping
points will be displayed as fast blinking "
icons.
Reference:
• In the custom setting mode (see page 40), it is possible to select how to indicate the
clipping points and the dynamic range. Below are the three display choices.
Five point

3-2-3 MID.TONE button

This button is used to set the measured value in the center of EV scale.
1) Take a measurement by pressing the Measur-
ing button ⑭ . Press MID.TONE button ⑳ to
set the Mid.Tone on the scale. "
center of the EV scale will blink continuously
twice to indicate that the Mid.Tone has been
set.
7. Camera Exposure Profiling
Clipping point(-)
" Dynamic range(-)
"
Exceed dynamic
range(blinking slowly)
Inside Range
" in the
Clipping point(+)
Dynamic range(+)
Mid.Tone
Exceed clipping
point (blinking faster)
Mid. Tone (blinking)
Outside Range
-49-