Advertisement
NOTES ON USING THE WATCH
ADJUSTING THE HAND POSITION
The STOPWATCH minute hand moves in correspondence with the STOPWATCH second hand.
TIME/CALENDAR SETTING
Before setting the time, be sure to stop and reset the stopwatch.
Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly. If
it is necessary to set the date during that time period, first change the time to any time outside it, set the
date and then reset the correct time.
When setting the hour hand, check that AM/PM is correctly set. The watch is so designed that the
date changes once in 24 hours.
Turn the hands past the 12 o'clock marker to determine whether the watch is set for the A.M. or P.M.
period. If the date changes, the time is set for the A.M. period. If the date does not change, the time
is set for the P.M. period.
When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it
back to the exact time.
Do not press any button with the crown at the second click. Otherwise, the STOPWATCH hands move
and resetting them is made necessary.
STOPWATCH
The STOPWATCH 1/10 second scale and hand differ in design and shape depending on the model.
Do not pull out the crown while the stopwatch is counting. If it is pulled out, the stopwatch operation
cannot be made.
When the stopwatch is reset, it takes up to 40 seconds for the STOPWATCH second and minute hands
to return to "0" position.
11
Advertisement
