Dell UltraSharp U2723QE Teardown Manual page 3

Move up the bracket, then push the earing-lock and
S15
disconnect the eDP cable away from the connector of
the panel module.
Take away the bracket chassis module and then put
S16
the bracket chassis module on a protective cushion.
Remove the Mylar tape from the hooks of the
S17
bracket.
Use a Philips-head screwdriver to remove
screws for interface board and power board from the
S18 bracket.
(No.1 screw size=M4x8, Torque=7
No.2~8 screw size=M3x7.5, Torque=7
6
7
Release the panel lamp cable from the hook of the
bracket. Remove the power board board and
S19
interface board from the
carefully, and then
DELL U2723QE
8pcs
kgfxcm;
±1
kgfxcm)
±1
3
8 2
1
5
4
bracket chassis module
disconnect all of the cables.
3