HAYGAIN HG ONE User Manual page 24

The hay chest is not on
level ground, which can
cause steam to only come
out of some manifold
spikes.
There is a kink in the
steam hose or it
is damaged.
There is an unusual
amount of water or
condensation in the steam
manifold.
The steam generator trips the circuit breaker or RCD
POSSIBLE CAUSE
The power supply may be
insufficient.
The steam generator is
damp.
The steam generator does not switch on
POSSIBLE CAUSE
There is no power supply.
The fuse in the steam
generator plug has blown.
A fault activated the safety
cut-out feature of the steam
generator.
24
Allow your Haygain Hay Steamer to cool down.
®
Move the hay chest to level ground.
Allow your Haygain Hay Steamer to cool down.
®
Replace the steam hose. To order a new steam hose,
contact us.
Allow your Haygain Hay Steamer to cool down.
®
Disconnect the steam hose from the hay chest. To
drain water from the steam manifold, tilt the hay
chest backwards.
SOLUTION
Check the steam generator is connected to a
sufficient power supply. If you are unsure, contact a
qualified electrician. Try turning off other appliances.
Wait 24 hours for the steam generator to dry out,
then try again. Always keep the steam generator in
a warm and dry environment. To help prevent
damp, keep the floor near the steam generator dry.
SOLUTION
Plug the steam generator into a working power outlet.
Replace the fuse in the steam generator plug.
The steam generator requires servicing. Contact us.
Troubleshooting
© Haygain