Schumacher Instant Power XP2260 Owner's Manual page 11

Jump starter and dc power source
Hide thumbs Also See for Instant Power XP2260:
Table of Contents

Advertisement

Available languages

Available languages

NOTE: To prevent overheating, the compressor has built-in thermal protection
that will turn the compressor off before it overheats. If the compressor shuts
off, wait a few minutes and it will automatically restart when the compressor
cools.
NOTE: The air compressor is rated for 150 PSI.
Vehicle Tires 13" to 16"
bike Tire
Sports balls
These times are approximate. Use the air compressor gauge to ensure the
proper pressure has been reached. Do not over inflate.
5.7
using the Inflator
Risk of explosion.
Read instructions of the product being inflated before using the
inflator. Avoid over inflation, do not exceed the manufacturer's
recommended pressures. Do not leave the inflator unattended during
use.
1.
Ensure the battery clips are securely on the storage holders.
2.
Attach the corrugated hose with end adapter to the high-flow inflator outlet
located near the Compressor/Inflator switch on the back of the Instant
Power™.
3.
The main accessory adapter attached to the corrugated hose
accommodates up to 4 sizes. If another size is needed, an additional
adapter can be attached to the end of the main accessory adapter.
4.
Insert the adapter into the product to be inflated.
5.
Push the Compressor/Inflator switch to the INFLATOR position and inflate
the product.
6.
When the product is inflated to the desired level, push the Compressor/
Inflator switch to the OFF position and remove the adapter.
24" beach ball
Pool Raft
Queen-size Air Mattress
2 Person boat
Times are estimates and will vary depending on size and product features.
5.8
using the Deflator
1.
Ensure the battery clips are securely on the storage holders.
2.
Attach the corrugated hose with the end adapter to the high-flow deflator
outlet which is located on the side of the Instant Power™.
3.
The main accessory adapter attached to the corrugated hose
accommodates up to 4 sizes. If another size is needed, an additional
adapter can be attached to the end of the main accessory adapter.
4.
Insert the adapter into the item to be deflated.
5.
Push the Compressor/Inflator switch to the INFLATOR position and deflate
the item.
estimated Time for Inflating
6 to 24 minutes
1 to 3 minutes
30 seconds
estimated Time for Inflating
1 to 3 minutes
4 to 6 minutes
4 to 8 minutes
8 to 10 minutes
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents