Remote Connectivity Kit; Introduction - Extreme Networks XEM XTR Operation Manual

Extreme Engineering Operations Manual |

5. REMOTE CONNECTIVITY KIT

5.1.

INTRODUCTION

The purpose of the Remote connectivity kit is to provide a wireless interface network from an
Ethernet connection Indoor.
The remote connectivity kit is normally transported to the Rig in an orange pelican case.
The pelican case contains two documents
07-OPDC-0020-00-A1-satellite-connectivity-procedure
•
07-OPDC-0026-00-A3-satalite-connect-kit-inventory
•
Private. Copyright © Extreme Engineering 2012. Unpublished Work. All rights reserved.
Figure 50 Remote Connectivity Kit
Surface Equipment Page | 38