Advertisement
1.Check that the stopper is properly installed and then install the internal and the external hinge
covers.
1.检查铰链限位件是否已预装好，确认后扣上铰链内外侧盖板；
Check if the stopper is correctly
and securely installed when
installing the cover
在安装铰链外盖时， 检查铰链限
位件是否安装好，以确保无脱落
Stopper
铰链限位件
1.Install the handle assembly onto the door glass.
1.将把手组件安装在门玻上。
1380414-T01-A
Install the internal cover while opening the door outward.
Install the external cover while opening the door inward.
门往外打开时，装好铰链内侧的盖板；
门往内打开时，装好铰链外侧的盖板。
Door opened inward
门往内打开状态
STEP
7
Install the handle onto the door glass
将把手安装在门玻上
STEP
9
-4-
1.Install the magnetic seal and the weather bar.
1.装好磁条，挡水胶条。
Important:
Install the hinge cover before the side weather bar.
重要：
在安装侧挡水胶条前，先扣好铰链盖板。
Install the bottom weather bar assembly
门底挡水胶条组件安装
1.Apply glass cement both inside and outside as shown in the figure below.
1.按下图所示，在淋浴房里外都打上玻璃胶。
Cut the bubble seal according to
the actual height of the glass to
avoid the installation positions of
the hinges
泡泡胶条需根据实际玻璃高度剪
断，用以避开铰链安装位置
Install the waterproof part before the side
weather bar.
防水密封件在安装侧挡水胶条前须装好。
STEP
8
STEP
10
Advertisement
