Selecting And Playing A Tone; Selecting A Main Tone - Casio Privia PX-200 User Manual

Selecting and Playing a Tone

METRONOME
VOLUME
Your digital piano has the following types of tones
built in.
Tone
Tone Type
Numbers
— Main Tones
001 to 020 Various
021 to 148 GM (General MIDI) 128
149, 150 Drum Sets

Selecting a Main Tone

1.
Press the POWER button.
Left Side
POWER button
IMPORTANT!
• When you turn on the digital piano, it performs a power
up operation in order to prepare its system. The power up
operation takes about 10 seconds, and is indicated by
the following messages appearing on the display.
E-8
TEMPO/SETTING
/YES
/NO
Number of Tones
12
20
2 sets
TONE
VARIOUS/GM TONES
2.
Use the VOLUME controller to adjust the
volume level.
3.
Press one of the 12 TONE buttons to select
the tone you want.
• The names of the main tones are marked above the
TONE buttons.
• This will cause the lamp of the selected tone's button
to light.
Example: GRAND PIANO 3
NOTE
• The DSP effect (pages E-25 and E-27) will be applied if
you select a tone with DSP.
• Note that the digital piano's DSP resources are limited.
Because of this, selecting a tone with DSP can cause notes
that are currently being played to cut off (if they are
being played using a tone with DSP), or it can remove the
DSP effect from an operation (layer, split, demo song)
that was previously assigned a tone with DSP.
REVERB
CHORUS
BRILLIANCE
SPLIT
(Please wait!)
(Preparing system)
(Complete!)