Using Effects - Casio Privia PX-200 User Manual

To specify the keyboard split point
1.
While holding down the SPLIT button, press
the keyboard key where you want the left limit
of the high range (right) tone to be.
Flashing
NOTE
• The split point also is the boundary between the
accompaniment keyboard range (pages E-14 to E-16) and
the melody keyboard range. You can change the location
of the split point, which also changes the sizes of the
keyboards.
• See "Other Settings" on page E-24 for information about
another method you can use to change the split point.

Using Effects

Reverb . . . . . Makes your notes resonate.
Chorus . . . . Adds more breadth to your notes.
To turn effects on and off
1.
Use the REVERB and CHORUS buttons to
turn the effects on and off as shown below.
• The lamps above the buttons show whether the
effects are on or off.
Lit
Off
Low range
High Range
High range leftmost key
On
Off
To change the effect type
1.
Turn on REVERB or CHORUS.
2.
While holding down the effect button
(REVERB or CHORUS), use the
/YES buttons to change the effect type as
described below.
[Reverb]
• Reverb Value
1: Room
2: Small Hall
3: Large Hall
4: Stadium
[Chorus]
• Chorus Value
1: Light Chorus
2: Medium Chorus
3: Deep Chorus
4: Flanger (Whooshing effect)
NOTE
• While the keyboard is layered, the chorus on/off setting
affects the layered tone only. While the keyboard is split,
the chorus on/off setting affects the low range tone only.
Selecting and Playing a Tone
/NO and
E-11