Panasonic SBC-P245K User Manual page 21

How to checkup and service
How to clean the power plug
Clean periodically
Remove the power plug from the socket, and remove
any dust or dirt on the terminals.
Also, remove any dust and dirt around the power cord.
Wait 5 minutes before reconnecting the power cord
after cleaning.
Note : The power plug shown in the picture may be
difference from the actual plug of product.
Depend on the local standard.
Attention
Dust or dirt may accumulate within a short period depending on the conditions
of the installation place or the environment for use. Check when cleaning.
Please check
Check the following for safety after cleaning
Is the power plug inserted firmly into a dedicated socket?
■
Is there any abnormal heating?
Are there any cracks, scuffs, or damage by mice on the power cord?
■
For any question, contact the dealer where purchased or the Customer
Service Department.
Warning
In case of a power blackout
Minimize opening and closing the door as much as possible.
■
Do not add any items. They may increase the internal temperature.
■
Fill the cooler with dry ice in case of a pre announced lengthy power
■
outage.
When not using the product for a
long time
Remove all items from the product, and remove the plug from the power socket.
■
Clean inside the product, and wipe away any moisture thoroughly.
■
Keep the door open to allow air ventilation for prevention bad odor and fungus.
■
CMT-6-P110-113-00-0.indd 21 CMT-6-P110-113-00-0.indd 21
21
05/15/12 8:09 AM 05/15/12 8:09 AM