Operation
Introduction
Use the plug supplied with the product.
■
Use the electric cord supplied.
Remove packaging materials and tapes,
■
and then leave the product for a while
for ventilation.
Accessories are kept inside the product. Check if anything is missing
■
(Refer to Page 8).
The product is cleaned before packing. However, cleaning before use is
■
recommended.
Install the shelf supports correctly.
■
Conduct a test run before merchandise are stored.
■
It starts cooling after 10 minutes.
Operate for approx. 1 hour after power on, and use it after confirming that
the interior has cooled.
Instructions for use
The product is designed to cool items
■
by ventilating cool air. If cool air is
not well ventilated, merchandise will
not be cooled effectively. Follow the
instructions below.
Do not place the wine next to inner
1
barrel wall.
Always install the lower shelf.
2
How to place merchandise in the
product
Do not put or throw merchandise
■
exceeding 20kg into the shelf.
Surely place pre cool merchandise.
■
Practices first in, first out rotation to
■
ensure the quality of articles.
Place merchandise within a shelf.
■
Arrange merchandise in each shelf
■
uniformly.
CMT-6-P110-113-00-0.indd 11
CMT-6-P110-113-00-0.indd 11
Single-phase socket
with earth terminal
Sectional side view
Evaporator
(Next to rear
inner barrel
wall)
11
05/15/12 8:09 AM
05/15/12 8:09 AM