Moving Projector - Sanyo PLC-XF46N/E Owner's Manual

For safety, be sure to hold Carrying Handles
on both sides by 2 or more people when
moving a projector. Moving it unproperly may
result in damage of cabinet or person's
injury.
Replace lens cap and retract feet to prevent
damage to lens and cabinet.
1
Pull up lock buttons on each side of carrying handles
and release locks.
2 Pull carrying handles out fully until it's locked (with a
click). Move a projector by holding two handles by 2 or
more people.
3 To retract carrying handles, pull up lock buttons and
release lock of handles and press handles fully in until
it's locked.
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR
● Do not drop or bump a projector, otherwise damages or malfunctions may result.
● When carrying a projector, use a suitable carrying case.
● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to a projector. To transport a projector through a courier or transport service, consult
your dealer and best case should be applied.

MOVING PROJECTOR

CARRYING
HANDLE
LOCK BUTTONS
Pull up lock buttons to
release lock.
PREPARATION
11