Picture Freeze Function; No Show Function; P-Timer Function - Sanyo PLC-UF15 Owner's Manual

BASIC OPERATION
Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE
button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button.
Press NO SHOW button on Remote Control Unit to black out a image.
To restore to normal, press NO SHOW button again or press any
other button except POINT / SELECT / RIGHT CLICK / LASER button.
Press P-TIMER button on Remote Control unit. Timer display "00 : 00"
appears on a screen and timer starts to count time (00 : 00 ~ 59 : 59).
To stop P-TIMER display, press P-TIMER button. And then, press P-TIMER
button again to cancel P-TIMER function.
24

PICTURE FREEZE FUNCTION

NO SHOW FUNCTION

P-TIMER FUNCTION

No show
Message disappears after 4 seconds.