Moving The Projector - Sanyo PLC-EF10NAL Owner's Manual

INSTALLATION
VENTILATION
This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
Do not cover the vents with papers or other materials.
Keep the rear grill at least 3.3' (1m) away from any object.
Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling air through the bottom vent.
Use the carry handle when moving the projector.
Replace the lens cover and rotate the adjustable feet fully
clockwise.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or give a shock to the projector, otherwise damage or malfunction may result.
When carrying the projector, use a Sanyo recommended Carrying Case.
Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, use a Sanyo recommended
Case.
For a carrying or transportation cases, contact a Sanyo authorized dealer.
8

MOVING THE PROJECTOR

AIR INTAKE VENT
(BOTTOM SIDE)
EXHAUST VENT
(REAR SIDE)