Installation; Setting-Up The Projector - Sanyo PLC-EF10NAL Owner's Manual

Sanyo multimedia projector owner's manual plc-ef10na, plc-ef10nal
Table of Contents

Advertisement

POSITIONING:
THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG
THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE
HAZARD.
ROOM LIGHT
The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.
Max. Zoom
Screen
Size
Min. Zoom
Distance
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by twisting
ADJUSTABLE FEET. Projection angle can be adjusted up
to 4 degrees by rotating Adjustable Feet.
DOWN
UP
UP
ADJUSTABLE FEET

SETTING-UP THE PROJECTOR

This projector is basically designed to project on a flat projection surface.
This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).
Refer to the figure below as an example when positioning the projector to the screen.
40"
77" 115"
40"
100"
77"
4.9' (1.5 m)
13.1' (4.0 m)
20' (6.1 m)
DOWN
Maximum Zoom
Minimum Zoom
300"
200"
150"
100"
231"
154"
DISTANCE
150"
200"
115"
154"
26.9' (8.2 m)
40' (12.2 m)
MOVE THE PROJECTED IMAGE POSITION
Adjust the projected image position (maximum 760mm
downward or upward on the 100" screen) by using lens shift
function. (See page 33.)

INSTALLATION

600"
400"
462"
308"
400"
300"
308"
231"
53.8' (16.4 m)
100"
SCREEN
600"
462"
80.7' (24.6 m)
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-ef10na

Table of Contents