Download Print this page
Draytek VigorSwitch FX2120 Quick Start Manual

Draytek VigorSwitch FX2120 Quick Start Manual

L2 + managed switch
Hide thumbs Also See for VigorSwitch FX2120:

Advertisement

Quick Links

iii

Advertisement

loading

Summary of Contents for Draytek VigorSwitch FX2120

  • Page 2 VigorSwitch FX2120 L2+ Managed Switch Quick Start Guide Version: 1.0 Firmware Version: V3.7.0 (For future update, please visit DrayTek web site) Date: April 27, 2022...
  • Page 3 VigorSwitch FX2120 Quick Start Guide Rack Mount Kit (brackets) DAC Cable The type of the power cord depends on the country that the switch will be installed. UK-type Power Cord EU-type Power Cord USA/Taiwan-type Power Cord AU/NZ-type Power Cord If any of these items is found missing or damaged, please contact your local supplier...
  • Page 4 SFP LNK/ACT, Port 1 to Port 12 12V DC Input Console Status Explanation Monitor On (Red) An alert for system failure due to overheating or wrong voltage. Blinking The system is (TBD) The device is in normal condition. On (Green) The switch finishes system booting and the system is ready.
  • Page 5 1. Insert the connector into the slot (port 1~12 of this switch). 2. Pull the release latch to remove it. The switch can be installed easily by using rack mount kit. Fasten the rack mount kit on both sides of the VigorSwitch using specific screws.
  • Page 6 Before configuring the switch, perform the following steps: 1. Set up a physical path between the switch and a PC. Insert one end of the DAC cable connector into the slot (port 1~12 of this switch); and insert the other end of the DAC cable into the slot on the network card on your PC. If a PC directly connects to the switch, you have to setup the same subnet mask for Default values of the managed switch are listed as follows: PC and the switch.
  • Page 7 2. After configuring correct IP address on your PC, open your web browser and access switch's IP address. The home page of VigorSwitch will be shown as below:...
  • Page 8 Web registration is preferred. You can register your Vigor device via https://myvigor.draytek.com. & & Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. https://www.draytek.com GPL Notice This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE.
  • Page 9: Eu Declaration Of Conformity

    EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole responsibility that the product  Product name: 12 ports x 10Gb SFP Switch  Model number: VigorSwitch FX2120 ...
  • Page 10: Declaration Of Conformity

    Declaration of Conformity We DrayTek Corp. , office at No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole responsibility that the product  Product name: 12 ports x 10Gb SFP Switch  Model number: VigorSwitch FX2120 ...
  • Page 11: Regulatory Information

    © All rights reserved. This publication contains information that is protected by copyright. No part Copyrights may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...