Advertisement
Available languages
Available languages
MANUAL DE INSTRUCCIONES
Check that the table surface is adequate to
prevent displacement of the stirrer.
Hold tight the tube and press slightly
over the vibrating surface
Main switch
Use the suitable adapter for each sample tube.
J
.P. SELECTA s.a.
CODE 80299 REV 0
1 Packing list
1. Shaker
2. Power cord.
3. Instruction manual.
2 Installation
Unit description:
Shaker with vibrating motion action to provide homogenize effect.
Suitable for use in tubes.
Location:
• Place on flat and levelled surface. Suitable for unit weight.
• Let free 20cm, at least, around the unit.
• Near to power socked (1m).
• (The unit can cause vibrating effect on the table)
Connection to power supply:
• Check that power socked have suitable voltage, according unit plate.
• Power socked have earth connector. Unit must be grounded.
• Unit could be dangerous is not properly grounded.
3 Technical specification
Vibrating speed:
Vibrating range:
Vibrating area
Power consumption:
Fuse:
Voltage:
Weight:
Dimensions:
4 Operation
Press the main switch.
For shaker tube, hold tight the tube and press slightly over the vibrating surface.
Speed setting
PLACE DE TUBE CLOSED WITH A STOPPER ¡¡¡
5 Warranty
The warranty covers the defective components or faulty assembling of the unit for 1
year since the purchasing date. Keep purchasing bill as the only valid document for
the purchasing date.
The warranty does not covers the damages caused for a unit malfunction.
Return goods are not accepted without previous J.P. SELECTA,s.a. approval.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Mar/2015
(Sujetas a modificaciones sin previo aviso)
2800rpm.
6mm
9mm
50W
1A (Ø5 x 20mm)
230V AC ±10% (50/60Hz)
2.5Kg
170x120x170 mm
Pag.: 3
Tel 34 937 700 877 Fax 34 937 702 362
Advertisement
