Edsal VR400BLK Manual

VR 400 / VR400BLK
VR VR- - - 400 / VR400BLK 400 / VR400BLK
Description Qty.
A - Beams 8
B - Braces 8
C - Post 8
D - Wood Shelf 4
E - Coupler 8
Safety Instructions Safety Instructions
Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. DO NOT OVERLOAD. Evenly distribute the weight on each level
and always keep the heavier loads on the bottom. Use care when working with metal parts.
General Instructions
General Instructions General Instructions
Assembly is done with the tabs of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the tabs properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the tabs are straight and
fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel
free to contact our manufacturing facility at, (773) 475-3000 and request customer service. We can also
be reached on the internet at the following email address : customerservice@edsal.com.
To obtain replacement parts, please provide the following information :
- Model # - Part #, Description, & Color
Steel Shelving
E - Post Coupler
- 4 Shelf - 60"h x 16"d x 36"w
- - 4 Shelf 4 Shelf - - 60"h x 16"d x 36"w 60"h x 16"d x 36"w
Part Number Part Size
HMBE 3404 34 27/32"
(GY / BLK)
HMBE 1603 14 27/32"
(GY / BLK)
HMPT 3003
(GY / BLK)
RPB21636 16" x 36"
HIPC0200 2 1/2" x 7/8"
- Location Purchased
Boltless
B - Braces
A - Beams
D - Wood Shelf
Note:
with a cloth or a wood block to protect the parts.
30"
- Date Purchased
MODEL NUMBER
Tools Necessary For Assembly
Tools Necessary For Assembly Tools Necessary For Assembly
Rubber Mallet
TAP GENTLY ! A Hammer could be used
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609
VR400BLK
VR-400
C - Post
www.edsal.com