Table of Contents
Advertisement
TDMC+ Teledyne Dual Mode Charger
• Be sure that any AC adaptors or extension cords provide all three connections (power, return
and ground), and are of suitable rating for the charger product.
DC Output Connection
•
DC connections must be made before starting the charge cycle.
•
Never use a cable that is worn, frayed, nicked or damaged or is in any other condition than will
make a reliable connection to the battery.
•
An intermittent cable connection will interfere with the proper operation of the charger.
•
Do not disconnect the charger from the battery while the charge cycle is in operation.
•
Be careful not to short the terminals of a battery together when connecting or disconnecting
the DC connection.
•
Make sure that the cable's terminals are free of any corrosion.
Charger
•
Never operate a charger that has been damaged in any way including impact, shock, or
excessive exposure to moisture, plague, pestilence or locusts.
•
Do not disassemble the charger. No user serviceable parts inside. Return the product to
Teledyne Battery Products for service: call or email for return instructions.
Personal Precautions
•
Have plenty of fresh water and soap nearby in case battery electrolyte contacts skin, clothing
or eyes. Wear complete eye and skin protection when connecting, disconnecting, handling and
charging batteries. In the event of an accident, immediately flood the affected area with water
and get medical attention.
•
Someone should be within the range of your voice, aware of your activity, and be able to come
to your aid when you are working with or near a battery.
•
Never smoke, or allow a spark or flame, in the vicinity of a battery or engine.
•
Remove jewelry
•
Wear eye protection
Questions?
Write to:
support@teledynebattery.com
Or call: 1 (800) 456 0070 / 1 (909) 793 3131.
Page 6/15
Advertisement
Table of Contents
