Tvpc Operations; Viewing The Tvpc; Selecting The Signal Source For The Pip Frame; Changing Channels For The Tvpc Frame - Sanyo AVL-278 Instruction Manual

PIP Operations (Not on all models)
Viewing the Picture-in-Picture
The TVPC function is available only when the main frame is in VGA (computer) mode and the
vertical frequency is 60 Hz.
1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select PIP.
3
Press Enter to access the submenu.
The PIP On/Off item will be highlighted automatically.
4
Press Enter to select On or Off.
Note:
You may quickly open or close PIP frame by directly by using the PIP button.
4
4 Audio is from the main picture only.

Selecting the Signal Source for the PIP Frame

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select PIP.
3
Press Enter to access the submenu.
4
Press CH +/- repeatedly to select Source.
5
Press Enter repeatedly to select signal source for the PIP frame.
You may select RF, Video1, Video2, SVideo or YPbPr for the PIP Frame.
Note:
You may quickly select signal source for the PIP frame by using the P.S.
Changing Channels for the PIP Frame
When the PIP frame is in TV mode, press the up or down button to change channels.
When you press the up or down, the unit changes channels in sequence. You will see all the channels that the
unit has memorized.
You will not see channels that were erased.
29
MAIN MENU
Picture
PIP On/Off
Source
Sound
H Position
CH
V Position
System
Size
PBP
OSD
PIP
On
Setup
Main Frame
PIP Frame
MAIN MENU
Picture
PIP On/Off
Source
Sound
H Position
CH
V Position
System
Size
PBP
OSD
PIP
RF
Setup