Setting System In Vga Mode; Changing The Position Of Image; Adjusting Clock And Phase; Adjusting The Picture Automatically - Sanyo AVL-278 Instruction Manual

Setting System In VGA Mode

Changing the Position of Image

The unit allows you to adjust the position of the screen if it is not well-aligned.
1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
4
Press CH+/- to select H position or V position.
5
Press VOL+/- to adjust the value of the item until the screen is well-aligned.

Adjusting Clock and Phase

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
4
Press CH+/- to select Clock or Phase.
5
Press VOL+/- to adjust the value of the item until the screen is well-aligned.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is
apparent in
the image, try adjusting the clock frequency setting.
You may find that images blur, depending on the clock phase of your PC's Processor. If you
experience blurring ,

Adjusting the Picture Automatically

1
Press Menu to display the menu main page.
2
Press CH +/- repeatedly to select System.
3
Press Enter to access the submenu.
4
Press CH+/- repeatedly to select Auto Adjust.
5
Press Enter to confirm.
You may quickly adjust the picture by using the Auto button directly. The unit automatically adjusts phase,
clock or position, etc.
The Auto Adjust function only works when the picture is displayed in 16:9 with full screen.
Setting System
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
(continued)
40
40
24