Preparation; Using The Remote Control; Batteries For The Remote Control; Power Connection - Sanyo AVL-278 Instruction Manual

Plasma display series true hdtv flat panel tv
Table of Contents

Advertisement

Preparation

Using the Remote Control

< Use the remote control by pointing it towards the remote sensor window of the set. Objects
between the remote control and sensor window may prevent proper operation.
Cautions regarding use of remote control
< Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
<
< The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In
such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window.

Batteries for the Remote Control

If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1
Open the battery cover.
< (Slide the cover while pressing
down.)
Precautions on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
< Place batteries with their terminals corresponding to the (+) and (–) indications.
< Different types of batteries have different characteristics. Do not mix batteries of different types.
< Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to
leak chemicals.
< Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is
found, wipe with a cloth.
< The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
< If the remote control is not used for an extended period of time, remove the batteries from the remote control.
2
Insert two size-AAA batteries.
< (Place the batteries with their terminals
corresponding to the (+) and (–) indications
in the battery compartment.)
5m
3
Replace the cover and slide in
reverse until the lock snaps.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avp-428Avl-328Avl-408

Table of Contents