Random Playback [Cd]; Programmed Playback [Cd] - Sanyo DVD-SL33 Instruction Manual

Random Playback [CD]

1. Press [PROGRAM/RANDOM] once in the stop mode.
• "Random" appears on the TV screen.
2. Press [a PLAY] to begin random playback.
• "RND" appears on the FL display.
The unit will automatically select tracks at random.
Notes:
To stop random playback, press [ n ].
•
• [A-B REPEAT] and [SEARCH MODE] do not work during Ran-
dom Playback.
Important Note:
" " may appear on the TV screen during operation. This
icon means that the function is not available on the disc now.

Programmed Playback [CD]

Up to 20 selections can be programmed.
Programming procedure
1. Press [PROGRAM/RANDOM] twice in the stop mode.
• "Program Mode" screen appears.
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
• If you make a mistake, press [CLEAR].
• To quit the "Program Mode" screen, press [PROGRAM/
RANDOM].
3. Press [ 5 ] to move the highlighted box down.
Example:
4. Repeat steps 2 and 3 as above to select another track.
5. Press [a PLAY] to start playback.
• "PGM" appears on the FL display.
When all programmed selections have played, the unit stops
automatically.
• The programmed contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM] twice
to call up the "Program Mode" screen, then press [a PLAY].
DVD-SL33/CA(English) 23
z/ON
1
ON SCREEN
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
AUDIO
REV SLOW
n (Stop)
PREV
2
REV
z/ON
1
ON SCREEN
SUBTITLE
CHANGE
SUBTITLE
ON/OFF
AUDIO
REV SLOW
PREV
5
REV
1
2
4
7
To clear the program one by one
1. Press [PROGRAM/RANDOM] twice to display the "Program
Mode" screen.
2. Press [ 4 ] or [ 5 ] to select the track number.
3. Press [CLEAR].
To clear all the programs
1. Press [PROGRAM/RANDOM] twice to display the "Program
Mode" screen.
2. Press [ 4 ] to select "All Clear".
3. Press [ENT].
To change the program
1. Press [PROGRAM/RANDOM] twice to display the "Program
Mode" Screen.
2. Press [ 4 ] or [ 5 ] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the "Program Mode" screen, press [PROGRAM/
RANDOM].
-E22-
13/06/2003, 10:06
PICTURE
LAST MEMO OPEN/CLOSE
MODE
PROGRAM
/RANDOM REPEAT A-B REPEAT
ANGLE
ZOOM ANGLE
REPLAY
SETUP MENU
4
b ENT a
TOP MENU RETURN
5
FWD SLOW
PAUSE/STEP
NEXT
PLAY
FWD
PICTURE
LAST MEMO OPEN/CLOSE
MODE
PROGRAM
REPEAT A-B REPEAT
/RANDOM
ANGLE
ZOOM ANGLE
REPLAY
SETUP MENU
4
b a
ENT
TOP MENU RETURN
5
3
FWD SLOW
PAUSE/STEP
NEXT
PLAY
FWD
CLEAR
CLEAR
2 3 C
5 6 0
SEARCH
MODE
8 9