Connecting To A Tv With Progressive-Scan Capability (Example 2) - Sanyo DVD-SL33 Instruction Manual

Connecting to a TV with Progressive-scan Capability (Example 2)

Your TV must be capable of handing progressive scanning and have component video input capability.
DVD video player
To AC 120V, 60Hz
*Audio cable (not supplied)
1. Connect the DVD video player to the component video input
jacks of the TV. (The VIDEO OUT or S-VIDEO OUT jack
connection is not necessary.)
2. Set the VIDEO OUT SELECT switch to the COMPONENT
positon.
3. You also need to connect the left and right audio cables (not
supplied) to the AUDIO OUT jack of DVD video player and
the Audio input jacks of the TV.
4. Set the DVD video player to the PROGRESSIVE position.
See page E15.
Progressive Scanning
While interlaced scanning produces one frame of video in two
fields, progressive scanning creates one frame in one field.
Conventional interlaced scanning constitutes one second with
30 frames (60 fields), but progressive scanning constitutes it with
60 frames from scratch. Progressive scanning can reproduce
shaper picture with high resolution for still image or other picture
containing long texts or horizontal lines.
This model has compliance with 525p (progressive) system.
Interlaced scanning
Progressive scanning
DVD-SL33/CA(English) 11
To COMPENENT VIDEO
OUT jacks
To AUDIO OUT jacks
To audio
input jacks
-E10-
*Component video cable (not supplied)
R L Y
AUDIO INPUT COMPONENT VIDEO INPUT
TV with progressive-scan
capability
*Please consult your local audio/video dealer.
Notes:
• Please refer to your TV instruction manual.
• When you connect the DVD video player to your TV, be sure
to turn off the power and disconnect both units from the wall
outlet until all the connections have been made.
• Do not connect the DVD video player to a VCR directly. The
playback picture will be distorted because DVD video discs
are copy protected.
13/06/2003, 10:06
To COMPONENT
VIDEO INPUT jacks
P P
B R