Accessories And Hardware - Sanyo CCA-BC200 Instruction Manual

ACCESSORIES AND HARDWARE

Make sure all the following parts are included in the Rear View Back up Camera System kit.
1
Rear view camera.........1 pc.
(with approx. 26.2 ft. long cable)
ECU box...................1 pc.
(Electronic Control Unit box)
Bracket (for camera)...1 pc.
(with double sided tape)
Cable clamp...10 pcs.
Waterproof pad...1 pc.
Instruction manual... 1 pc.
(with warranty)
Power supply cable......1 pc.
(approx. 4.92 ft. long, with fuse)
Hook-and-loop fastener...1 set
(for ECU box)
Screw (for camera)...2 pcs.
(Hexagon type, M3 x 6)
Cable tie......2 pcs.
Double sided tape... 1 pc.
(for waterproof pad)
Alignment guide...... 1 pc.
−6−
Control switch cable.......1 pc.
(approx. 8.20 ft. long,
with double sided tape)
Video output cable......1 pc.
Hexagon wrench...1 pc.
Self-lock conductor... 1 pc.
(for reverse signal detection)
Cleaning cloth... 1 pc.