Rear View Back Up Camera System Outline - Sanyo CCA-BC200 Instruction Manual

REAR VIEW BACK UP CAMERA
SYSTEM OUTLINE
Display mode
Including the standard rear view image captured by
the camera, a digitally corrected rear view,
view-from-top, and standard rear view can be
selected. Guide lines are indicated in order to assist
the driver and assure safety when backing up.
View-from-top
The view-from-top height can be set by alignment of the
virtual camera. (For alignment process, refer to Step 3
on page 20.)
Offset Calibration
If the camera is not installed in the center rear of the
vehicle, the offset can be corrected using the alignment
function.
height alignment
Need help? Call
1-800-421-5013
Standard rear view
View-from-top
View-from-top
(Virtual camera 1)
Standard view
(Deviated center)
−7−
Camera
Virtual camera
View-from-top
Standard rear view
Digitally corrected rear view
Left/right guide lines (Green)
(Guide lines to indicate
width of vehicle)
6 ft. guide line (Light blue)
3 ft. guide line (Yellow)
1.5 ft. guide line (Red)
Virtual camera 2
Camera
Virtual camera 1
View-from-top
(Virtual camera 2)
View-from-top
(Corrected center)