Advertisement
Assembly & Installation Instructions
WARNING! Do not overtighten the hardware. Overtightening can lead to structural damage
and may negatively affect the performance of your product.
Step 1:
Connect the Front U Frame (#1) / Two
Connection Bars (#3) / Rear U Frame
(#2) and Bolted using four (4) M6x30
Bolts, eight (8) Steel Washers and four
(4) Nuts as shown in Figure 1.
Step 2:
Install Rear Vertical Support Bars
(#4) to the assembled Roof Frame
using two (2) M6x55 Bolts, four (4)
Steel Washers and two (2) Nuts as
shown in Figure 2.
Step 3:
Install Front Vertical Support Bars
(#5) to the assembled Roof
Frame using two (2) M6x55 Bolts,
four (4) Steel Washers and two
(2) Nuts as shown in Figure 3.
Step 4:
Install Side Connection Bars (#6)
to Front and Rear Vertical Bars
(#4,5) using four (4) M6x45 Bolts,
eight (8) Steel Washers and four
(4) Nuts as shown in Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4
6
Advertisement
