1 INTRODUCTION Closing Words Welcome to skywalk! Congratulations on the purchase of your new X-ALPS5 and thank you for your trust in us and in our products. In this manual you will find product-specific information that will help Line Schematic you quickly get to know your new paraglider to ensure your fun for a long time.
The mix of materials used on the lines of the X-ALPS 5 is an ideal combination of dura- bility, low stretch and low drag. The skywalk X-ALPS 5 has 3A-, 3 B-, and 1 stabilo line. The main-stabilo is connected with the A2-riser. The brake lines are not load-bearing and lead from the trailing edge over the main brake lines through the low-friction rings on the B-risers to the brake handles.
FLYING WITH A MOTOR > the A-mainlines are magenta. Currently, the X-ALPS5 has no certification for flying with a motor. You can find out the cur- > the B-mainlines are blue. rent status of motor certification at any dealer or importer, or by asking skywalk directly.
The X-ALPS 5 is certified to LTF 09 and EN926-1, EN926-2 in the category D. The skywalk X-ALPS 5 has been certified with special folding lines. The provocation of side Special folding lines were used when X-ALPS5 was going through certification. Without...
PRO GUIDE // X-ALPS5 11 PACKING INSTRUCTIONS Make sure that the openings at the leading edge are neatly aligned. The Rigid Foils on the stabilos Carefully packing your paraglider guarantees a consistently high level of quality. must also be pulled up towards the remaining Stick to the packing instructions described here to protect the Rigid Foils and use the leading edge.
BRIII aa 1 bb 9 The X-ALPS5 will provide you with plenty of joy over many years if you treat it and care BIII AIII for it properly. Respect for the demands and dangers of our sport are essential for successful and beautiful flights.
PRO GUIDE // X-ALPS5 15 RISERS 16 OVERVIEW GLIDER The difference between the measured riser lengths and the original riser lengths should not exceed ± 5mm. X-ALPS5, size 75+, 85+, 95+ and 105+ 545mm 545mm 545mm 545mm 455mm 365mm 1 Main lines...
PRO GUIDE // X-ALPS5 Date: Examinations of the lines: TEST PROTOCOL Firmness of main lines: Customer, Name: Results [+/–]: Description of failure: Suggested repairs: Adress: Phone: Visual check of trimming: Checkflight necessary? Type certificate patch? Glider: Size: Serial number: Identification plate?
Need help?
Do you have a question about the X-ALPS5 and is the answer not in the manual?
Questions and answers