Advertisement
Zander Round Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
long screw
short screw
x8
Hardware Supplied
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
B
C
foot pads
x4
x4
1
Advertisement
Table of Contents
Related Manuals for Mocka Zander Round Side Table
Summary of Contents for Mocka Zander Round Side Table
- Page 1 Please follow the instructions below for correct assembly. long screw short screw foot pads Hardware Supplied Phillips & Flathead screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 Attach panels [2] and [3] to panel [1] and secure with 4 x screws (B). Attach 4 x legs [4] to assembled frame and secure with 4 x screws (A). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Attach panels [5] and [6] to assembled frame and secure with 4 x Lift the table into place, do not drag. You’re done, enjoy! screws (A), attach 4 x footpads (C) as shown, Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Zander Round Side Table and is the answer not in the manual?
Questions and answers