Table of Contents
Advertisement
3.4.5
Advanced: Power Management
Options summary:
Power Mode
Select power supply mode.
Restore on Power
Loss
Select power state when power is re-applied after a power failure.
RTC wake system
from S5
Enable or disable System wake on alarm event. When enabled, System will wake o n the
hr::min::sec specified
Chapter 3 – AMI BIOS Setup
ATX Type
AT Type
Last State
Power On
Power Off
Disabled
Fixed Time
Dynamic Time
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
32
Advertisement
Table of Contents
