Table of Contents
Advertisement
3.4.7
Power Management
Options Summary
Power Mode
Select system power mode
State After G3
Specify what state to go to when power is re-applied after a power failure (G3 state).
RTC wake system
from S5
Fixed Time: System will wake on the hr::min::sec specified./n Dynamic Time: System will
wake on the current time + Increase minute(s)
Wake on LAN
Enable
Enable/Disable integrated LAN to wake the system.
Chapter 3 – AMI BIOS Setup
ATX Type
AT Type
S0 State
S5 State
Last State
Disable
Fixed Time
Dynamic Time
Enabled
Disabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
41
Advertisement
Table of Contents
