When And How To Use The Scu Program; When To Use; Starting Scu - Motorola HK1223 Owner's Manual

When and How to Use the SCU Program

When to Use

You need to run the SCU program when:
You see an error message on the screen requesting you to run Setup.
You want to restore the factory default settings.
You want to modify some specific settings according to the hardware.
You want to modify some specific settings to optimize system
performance.

Starting SCU

NOTES:
The Setup screens shown in this chapter are for your reference only. The actual
items or settings on your computer may differ.
The Setup program may have been updated after the publication of this manual.
The settings you select in your operating system might override similar settings in
Setup.
To run SCU, press
the screen during system startup. The prompt shows up on the screen for
only a few seconds. You must press
as shown next.
5-2
F2
when the prompt appears in the lower left corner of
F2
quickly. The SCU menu appears
Setup Configuration Utility (SCU)