Basic Memory Card Operation - Casio 575E1A User Manual

Saving Data
SD memory card slot
To remove a memory card from the card slot
1
Press the memory card into the card slot and then
release it.
• This will cause the card to come part way out of the
digital piano.
2
Pull the memory card out of the card slot.
• After making sure that the data access lamp is not lit,
carefully pull the memory card from the card slot.*
* Never remove the memory card from the card slot
or turn off the digital piano while any of the
following conditions exists.
• While the digital piano is in the SMF Player Mode
and the CARD indicator is on the display
• While the data access lamp is lit and the message
"Pls Wait" is on the display, indicating that a card
access operation is being performed

Basic Memory Card Operation

1
Insert the memory card into the card slot.
2
Press the CARD button.
• This causes the CARD indicator to appear on the
display, and also displays "Card" in the display's text
area.
3
Press the [ ] CURSOR button to display the Card
Mode menu.
E-82
4
Use the [ ] and [ ] CURSOR buttons to display
the screen for the type of operation you want to
perform.
L
[ ]
S
[ ]
R
[ ]
D
[ ]
F
• See the pages referenced below for details about using
each of the above menu operations.
Loading a file (Crd Load):
Saving a file (Crd Save):
Renaming a file (Crd Rename):
Deleting a file (Crd Delete):
Formatting an SD memory card (Crd Format): page E-86
5
Press the [ ] CURSOR button to advance to the
next operation screen of each menu.
NOTE
• Layer, split, and Auto Harmonize are automatically turned
off while the memory card is being used. Tone and
rhythm selection, and rhythm playback are also all
disabled.
CURSOR
[+] / [–]
YES/NO
CARD
o a d
[ ]
a v e
[ ]
e n a m e
[ ]
e l e t e
[ ]
o r m a t
page E-84
page E-83
page E-85
page E-86