Configuring Other Settings - Casio 575E1A User Manual

4
Use tthe number buttons to input the three-digit
file number of the file you want to play.
• The name of the currently selected file will appear in
the text area of the display. The file number is shown
in the number area of the display. The Tempo/
Measure area of the display shows the size of the file
in kilobytes.
• You can also use the [ ] and [ ] CURSOR buttons or
[+] and [–] buttons to change the file.
5
Press the START/STOP button
• This starts playback of the selected file.
• You can use the TEMPO buttons to adjust the tempo
within the range of 30 to 255.
• You can turn channels 1 through 16 on and off,
regardless of whether file playback is in progress or
stopped. For more information, see "Turning
Channels On and Off" on page E-39.
6
To stop file playback, press the START/STOP button
again.
Adjusting SMF Playback Volume
The following procedure explains how to control the overall
volume of SMF data playback. You can adjust volume while
playback is stopped or ongoing.
1
Press the ACCOMP VOLUME button.
• This causes the "SMF Vol." indicator to appear on the
display, along with a value that indicates the current
SMF volume setting.
2
Use the [+] and [–] buttons or the number buttons
to adjust the SMF volume.
• You can specify a setting in the range of 000
(minimum) to 127 (maximum).
• Pressing [+] and [–] at the same time returns the SMF
volume setting to 100.
• Note that this setting does not affect the volume of
the notes you play on the keyboard.

Configuring Other Settings

To configure other settings
1
While playback is stopped, select the file you want
to play back.
• Perform steps 1 through 3 under "To play back an
SMF" to select a file.
Using the SMF Player
2
Press the [ ] CURSOR button to display a screen
for selecting the part you want to play on the
keyboard (play along part).
• Use the [ ] and [ ] CURSOR buttons, the [+] and [–]
buttons, or the number buttons to select the play along
part.
• You can specify the part you want to play on the
keyboard (the play-along part) as a value in the range
of 1 through 16.
• Press the MIXER button to enter the Mixer Mode.
Turn off the channel that corresponds to the play along
part you selected above. See "Turning Channels On
and Off" on page E-39 for more information.
Performing this step turns off the applicable part so
you can play it on the keyboard along with the rest of
the SMF playback.
NOTE
• Entering the SMF Player Mode initializes all parts by
turning on all Mixer Mode channels.
• After configuring Mixer Mode settings, press the MIXER
button or EXIT button to return to the SMF Player Mode.
3
Press the [ ] CURSOR button to display the
playback mode selection screen. Use the [ ] and
[ ] CURSOR buttons or the [+] and [–] buttons to
select the playback mode.
You can select from among the following four playback
modes.
S1 : One file, one time
SL : One file, repeat
A1 : All files, one time
AL : All files, repeat
4
Press the [ ] CURSOR button to display the output
mode selection screen.
• Use the [ ] and [ ] CURSOR buttons or the [+] and
[–] buttons to select the output mode.
• You can select from among the following two output
types.
Int : Digital piano's built-in speakers
Out : USB port
NOTE
• Layer, split, and Auto Harmonize are automatically turned
off in the SMF Player Mode.
E-75