Using Real-Time Recording - Casio 575E1A User Manual

Song Memory Function
VARIATION/FILL-IN 1/2
INTRO/ENDING 1/2
SYNCHRO/FILL-IN NEXT

Using Real-time Recording

With real-time recording, the notes you play on the keyboard
are recorded as you play them.
To record with real-time recording
1
Press the SONG MEMORY button twice to enter
real-time record standby.
• Perform step 2, below, within five seconds after
entering record standby.
• The level meters for tracks 11 through 16 are shown
on the display while the digital piano is in record
standby, so you can easily check which tracks are
already recorded. See "Level Meter Contents During
Record/Edit Standby" on page E-58 for details.
2
Use the number buttons to select a song number
(0 to 4).
Song number
S 1 R e
g
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the [ ] CURSOR
button to re-display it.
3
Make the following settings.
• Tone number
• Rhythm number
• Tempo
• MODE button
E-52
SONG MEMORY
START/STOP
c o r d
CURSOR
SONG MEMORY TRACK
4
Press the START/STOP button to start recording.
• When recording starts, the REC indicator flashes on
the display. After a few moments the indicator stops
flashing, and remains on the display.
• Real-time recording without a rhythm starts. If you
want to record with a rhythm, press the INTRO/
ENDING 1/2 or VARIATION/FILL-IN 1/2.
5
Play something on the keyboard.
• You can also record Auto Accompaniment chords by
selecting the applicable mode with the MODE button.
• The pedal and pitch bend operations are also
recorded. See "Track 1 Contents After Real-time
Recording" on page E-53 for details.
6
Press the START/STOP button to end recording
when you are finish playing.
• If you make a mistake while recording, you can stop
the record operation and begin over again from step
1, or you can use the editing function (page E-60) to
make corrections.
NOTE
• Using real-time recording to record to a track that already
contains recorded data replaces the previous recording
with the new one.
Number buttons
[+] / [–]
YES/NO