E - Cleaning And Maintenance - omake Omk.BRG01.E15.0001.U50 User Manual

E – CLEANING AND MAINTENANCE
Cleaning and maintenance after every use;
✓ Make sure that the plug is not plugged in or the switch is turned off while cleaning the
device.
✓ Clean the surface of the device after each use.
✓ If the device will not be used for a long time, the surfaces should be covered with a thin
layer of Vaseline.
✓ Do not use abrasive cleaning chemicals as these can leave harmful residues.
✓ Do not use pressurized water and steam while cleaning the device.
✓ Do not clean the outer stainless surface of the device with cleaner that can scratch the
material such as wire wool.
Periodic cleaning and maintenance;
✓ Maintenance should be done by qualified person.
✓ Parts that need to be removed during periodic cleaning should be removed and
reassembled by technical service personal.
✓ According to the frequency of use, the electrical maintenance of the device should be done
by spraying dry air after the electrical connection is cut.
28