Figure 2: Control Panel
If P1 stage is selected while the device is on, RL1 gives an
output for a preset of 10 seconds. Press
change the duration of P1 step.
Hold
buttons to change. For registration keep
button pressed.
If P2 stage is selected while the device is on, RL1 gives an
output for a preset of 20 seconds. Press
change the duration of P2 step.
Hold
buttons to change. For registration keep
button pressed .
If P3 stage is selected while the device is on, RL1 gives an
output for a preset of 30 seconds. Press
change the duration of P3 step.
Hold
buttons to change. For registration keep
button pressed.
26
button to
button to
button to