Install The Stand - Samsung UN32C4000 User Manual

Input Cables (Sold Separately)
HDMI HDMI-DVI
See separate guide for installing the stand.
Stand (1EA)
Follow the steps below to connect the TV to the stand.
Screws (M4 X L12)
Guide Stand
Stand
Rear
1. Connect the Guide Stand to the Stand
using five screws (M4 X L12) as shown.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
Component

Install the Stand

Guide Stand (1EA)
Top view
2. With your TV upright,
connect the TV to the Stand
as shown.
Composite (AV) Coaxial (RF)
(A)
(B)
Screws (10EA)
2
1
3. Fasten two screws (M4 X
L8) at position 1, and then
fasten three screws (M4 X
L8) at position 2.
VGA
5EA (M4 X L12)
5EA (M4 X L8)
5
English