Table of Contents
Advertisement
Cleaning and lubrication
1
3
5
7
9
20
Zone to be lubricated
2
4
6
8
10
Safety instruction
IMPORTANT. To reduce the risk of electric discharges, injuries and fire when using electric
tools, follow the fundamental safety measures indicated below. Read and follow these
instructions before using the tool, and keep the safety instructions!
Outside operations related to the use of the tool, your tool and its accessories must
be disconnected and stored in their relevant packaging.
It is imperative to disconnect your tool from all power sources for the following
operations:
-
Servicing.
-
Battery charging.
-
Maintenance.
-
Transport.
-
Storage.
When the tool is running, always remember to keep the hands away from the accessory head
being used. Do not work with the tool if you are tired or feeling unwell. Wear the specific
recommended personal protection equipment for each accessory. Keep the equipment out
of the reach of children or visitors.
Do not use the tool if there is a risk of fire or explosions, for example in presence of
flammable liquids or gases.
Never carry the charger by the cord, and do not pull on the cord to disconnect it from the
socket.
Keep the cord away from heat, oil and sharp edges.
Never use the tool at night or in bad light without setting up additional lighting. When using
the tool, keep both feet on the ground and keep as much balance as possible.
Caution: extensions can be made of conductive materials. Do not use near sources
of electricity or electric wires.
21
Advertisement
Table of Contents
