Page 2
Quick Start Guide - If needed, press quickly on the button to switch the relay in positive security, the relay is de-energized during an alarm English condition or a current breaking, “POS” is displayed. - Press 3 s on the button, “Buzz” screen is displayed with “ON” or “OFF” blinking. Briefly press on the button to activate (“ON”) or deactivate (“OFF”) (according to the last saved configuration) the buzzer during an alarm condition.
Guide rapide - In falling edge mode, the time-delay 1 corresponds to the time lag before the alarm goes off when the threshold has Français been reached. The time-delay 2, corresponds to the time lag before the alarm stops when the measurement is lower than the threshold plus the hysteresis.
Page 4
- Appuyer brièvement sur le bouton si besoin pour permuter le relais en sécurité positive, le relais est désexcité pendant - En mode front descendant, la temporisation 1 correspond au laps de temps qui s’écoule avant que l’alarme ne soit une condition d’alarme ou une coupure de courant, «...
Page 5
Portal de servicio al cliente / Portale servizio clienti 客服门户网站 Utilisez notre Portail service clients pour nous contacter Use our Customer service portal to contact us Contacte con nosotros a través del Portal de servicio al cliente Utilizzate il nostro Portale servizio clienti per contattarci 使用客服门户网站联系我们 https://sauermann-en.custhelp.com www.sauermanngroup.com...
Need help?
Do you have a question about the CO2ST-S and is the answer not in the manual?
Questions and answers